Metal coating is a method that helps protect the metal from corrosion and reduces wear and tear of the material. These methods are often made from polymers, such as epoxy, moisture cure urethane, and polyurethane. This article will show you about what is the main function of metal coating and some advantages of this method to the industry. 

metal coating 1

Introduction of metal coating’s function to the material in the industry

In addition to the benefits mentioned above, design of this method helps to protect the metal from rust, dirt, and debris. Everyone will apply Metal coating to outdoor equipment, like boats, heavy equipment, automobiles, trains, and airplanes. It reduces the effect of wind, air, and water. The method protects it from these contaminants, thereby providing a more durable and long-lasting time of use for the product. Moreover, metal coatings are used to act as lubricants or torque agents to protect the materials. 

Recommendation metal coating method that suits each kind of materials

There are a lot of types of metal coating that can be applied but the three main types below are used the most nowadays. 

1. Metal coating method: Spray on material in the liquid form 

Products in the kitchen near the source such as stoves, racks, ... specialize in using this method

2. Metal coating method: Spray on the material in the powder form 

As the name implies, powder coating is the coating of a metal object with a powdery substance. It is known as an electrostatic process whereby charged coated elements have opposite polarity to the part to be coated. The difference in charge causes the powder particles to adhere to the metal surface. The coated object is then heat treated in an oven to harden the coating. It helps limit the impact of fire as well as limit heat generation. 

Learn about: How to install a roof top solar panel? Basic installation steps

metal coating 2

3. Metal coating method: Corrosion paint on the material 

It is the most accessible and affordable type of coating. Different paint formulations can be used depending on the type of metal, the operating environment and the performance requirements of that building. This method is essentially the application of liquid paint.

The importance of the metal coating method in the industry

Metal coating plays an important role in stabilizing the material. Almost everyone use this method in the industry thanks to the helpful following features:

– It helps improve resistance to welding, and weathering such as rainy and windy, providing radiation shielding. The Metal coating reduces friction to prevent the surface of the material from being scratched. 

– Moreover, it prevents metal corrosion, helps products prevent rust and staining to the maximum, it also can increase the adhesion of the top coat.

– Increased service life means a relatively large savings in living costs.

– Bringing high aesthetic value to serve many modern industrial fields.

metal coating 3

This article introduces metal coating and its function. Metal coatings, if used correctly, can be effective in prolonging the durability of many materials. However, remember that all coatings are susceptible to failure. Therefore, it is essential to understand the pros and cons of each coating type to choose the one that is best for your application.

Read more: Solar installation: how it works and Solar Panel Installation Process

Leave a Reply

Your email address will not be published.