boiler tube coating 1

People usually ask

Decommissioned wind turbines were removed from the foundation and restructured. Most turbines are recycled, including the tower, rotor shaft, gearbox, generator, and shaft rod. The blades cannot be recycled, and the disposal of the old turbine blades is becoming a problem that needs an urgent solution.

During the fireproofing paint process, the surface should not be soaked in water. Because it will damage the effectiveness of the fireproofing paint. Therefore, everyone does not recommend to apply fireproofing paint when it rains or has high humidity. It is better to apply fireproofing paint indoors or outdoor construction with a careful roof.

The dry ice technique removes 99.9% of mold spores faster than traditional cleaning methods when following IAQA standards. This process eliminates manual cleaning and produces no secondary waste, which reduces time and labor costs.

Repairing the gearbox, propeller or generator is extremely complicated. Spare parts are expensive and repair work requires long downtime. Therefore, you need to have an effective periodic maintenance plan, do not wait until damaging turbines and propellers to repair.

The finished size of the ringlock scaffold is the following information:
– The basic length: 900mm – 1200 mm – 1530 mm – 1700 mm.
– Normal width is: 1250mm.
– Length of the cross brace to connect and fix 2 frames is: 1710mm – 1960mm.

Answer for all question about industrial solution

How to store CO2 dry ice?

The best dry ice storage environment is below 32 degrees F (0 degrees C). Dry ice can sublimate (disappear) at a rate of 2% to

More information about industrial solution

Belzona Vietnam 1

Belzona Vietnam: The story behind the leader of the industry

Belzona, in general, and Belzona Vietnam, in particular, can be considered a leader in composite materials production, repair, and protection. The solutions provided by Belzona Vietnam are internationally certified and are recognized by customers for their performance. The following article will introduce you in more detail about this company.

sludge treatment 1

Sludge treatment – overview and steps of the sludge treatment process

Municipal sludge – known as sewage sludge – is a by-product of wastewater treatment. Sludge can also come from industrial facilities such as food manufacturers, pulp and paper mills, chemical and fuel plants, etc. Waste sludge treatment requires a specific process to ensure safety and not cause pollution to the environment.

No answer you need? Ask us